Products
- > IC-NT CT-BIO7
- > ID-SCM1
- > IL-NT AIO
- > IL-NT BIO8
- > IL-NT IO1
- > Inteli AIN8
- > Inteli AIN8TC
- > Inteli AIO9/1
- > Inteli IO8/8
- > IS-AIN8
- > IS-AIN8TC
- > I-AOUT8
- > ID-SCM
- > IG-IOM
- > IGL-RA15
- > IGS-PTM
- > IL-NT AOUT8
- > ID-RPU
- > IS-BIN16/8
- > NT-Converter
Inteli IO8/8
General Information
Peripheral module with Binary inputs/outputs and Analog outputs.
The extension module Inteli IO8/8 offers users more binary inputs and outputs for ComAp controllers. The unit offers the user the flexibility to configure the unit to have 8 binary inputs, 8 binary outputs, and 2 analog outputs, or 16 binary inputs, 0 binary outputs and 2 analog outputs via switches inside the controller. The Inteli IO8/8 is compatible with the InteliDrive DCU, InteliMains NT, InteliGen NT and InteliSys NT ranges of controllers.
Module is possible to configure (by switch on board) to two configurations:
1) Configuration 8/8
- 8 Binary inputs (options: pull up or pull down logic).
- 8 Binary outputs (options: Low side switch (LSS) or High side switch (HSS)).
- 2 Analog outputs (options: voltage (0-10V), current (0-20mA) and PWM (5V, adjustable frequency 200Hz-2,4kHz)).
2) Configuration 16/0
- 16 Binary inputs (options: pull up or pull down).
- 0 Binary outputs.
- 2 Analog outputs (options: voltage (0-10V), current (0-20mA) and PWM (5V, adjustable frequency 200Hz-2,4kHz)).
- Up to 12 Inteli IO8/8 module (in configuration 8/8) can be connected to the controller (InteliSys NT / InteliGen NT / InteliMains NT).
- Up to 6 Inteli IO8/8 module (in configuration 16/0) can be connected to the controller (InteliSys NT / InteliGen NT / InteliMains NT).
- Up to 4 Inteli IO8/8 (in configuration 8/8) can be connected to the InteliDrive DCU controller.
- LED indication of each Binary input/output.
- Safety function of Binary output: Regular reading of the real state of the Binary output.
- All settings are carried onboard switch or electronically (No jumpers).
